Visonic POWERMASTER-10 - INSTALLER GUIDE Guida Utente Scaricare il pdf (Pagina 30)

MENUS AND FUNCTIONS

D-303223 PowerMaster-10/30 G2 User's Guide 29

☺ Return to step 2

A "Happy Tune" ☺ sounds, the display reads the set time, returns to step 2

and then reads the selected time format.

6, 7

Additional Information (section B.7)

For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.

a. The display shows the currently selected format (indicated by a



symbol), for example, "

24 Hrs

b. You can now select either the 12 Hrs or 24 Hrs time format using the or buttons.

The display shows the Time in the selected Time Format, for example, "

12:40 PM

", with the cursor blinking

on the first hour digit "1". The letter that follows the displayed time indicates one of the following:

"A" = AM; "P" = PM and "none" for 24 Hrs time format.

When the curser is positioned on the AM/PM digit, you can set to "AM" with the button and the

"PM" with the button

You can move the cursor to the next or previous digit using the or buttons.

This setting can be performed only after completing steps 1 – 3 of section B.7A.

The time saved is displayed without the cursor, for example, "

08:55 A

" followed by the selected time

format.

You can now select another option in the User Settings menu (see section B.1 and section B.2), or quit

programming (see section B.3).

B.8 Setting the Date & Date Format

 Here you can program or adjust the built-in-calendar to show the correct date in the desired date format.

 You can select between a "mm/dd/yyyy" and a "dd/mm/yyyy" date format.



Carefully read the section titled "Additional Information" according to the indicated references

etc – see

table at end of this section.

A. To Set the Date Format

Enter the [USER SETTINGS] menu and select the [DATE & FORMAT]

option and press .

The display shows the currently selected date format.

Click the or button until the display reads the desired date

format, for example, "DD/MM/YYYY" and press to confirm.

B. To Set the Date

At the blinking cursor position, enter the correct date, for example,

“20/04/2011”, using the numerical keypad.

3, 4, 5

When you are satisfied with the setting, press to confirm.

☺ Return to step 2

A "Happy Tune" ☺ sounds, the display shows the set date and returns to

step 2 and shows the selected date format.

Additional Information (section B.8)

For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.

The display shows the currently selected format (indicated by a



symbol), for example, "MM/DD/YYYY".

You can now select either the "MM/DD/YYYY" or "DD/MM/YYYY" date format by pressing or

The display shows the Date and selected Date Format, for example, "

30.12.2007

", with the cursor blinking

TIME 08:55A

DATE & FORMAT

DATE MM/DD/YYYY



DATE DD/MM/YYYY



DATE 20/04/2011

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 61 62

Commenti su questo manuale

Nessun commento

Visonic POWERMASTER-10 - INSTALLER GUIDE Guida Utente Pagina 30

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Visonic POWERMASTER-10 - INSTALLER GUIDE