Visonic PowerLink2 Guida Utente Scaricare il pdf (Pagina 16)

Installing the Visonic PowerLink2

5. If requested, set the Port Forwarding rule name to PowerLink2.

6. Save the information.

7. If requested, restart the router and wait for the router to restart

Step 4: Wi-Fi (Wireless Network) Configuration

Perform this step if you intend to connect wireless cameras to the Visonic

PowerLink2.

1. In your Router Configuration window, locate the Wireless Network

configuration screen.

2. Set a value for the SSID. Changing the default SSID value is recommended to

ensure a secured wireless network.

Note that some cameras will not accept an SSID that consists of non-

alphanumeric characters.

3. In the Visonic PowerLink2 Installation Form (see Appendix B), write down the

value of SSID for future reference.

4. Select a Channel. (You can pick any channel. The default channel is usually 6).

5. Mark the selected channel in the Visonic PowerLink2 Installation Form

(Appendix B).

Step 5: Wi-Fi Encryption Configuration

PowerLink2 supports three encryption methods:

1. No encryption

2. WEP 64bit / 128bit

3. WPA

Enabling encryption on your Wi-Fi network is highly recommended and ensures that

any information transferred on the Wi-Fi network such as camera images is secured

against unauthorized viewers.

Refer to your router user's manual in order to set up encryption.

Some routers need restart in order to apply the settings. Please make sure to restart the

router if restart is needed.

Visonic PowerLink2 Configuration

Step 1: Logging-in to the Visonic PowerLink2

Refer to Chapter 3 for instructions on the login procedure.

Step 2: Connection Setup

1. In the left frame of the Visonic PowerLink2 window click SETUP.

2. Click the NETWORK tab.

3. Copy the SSID from the Visonic PowerLink2 Installation Form (see Appendix

B).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 65 66

Nessun commento

Visonic PowerLink2 Guida Utente Pagina 16